Nathaniel Okoye-Brandt: Hardware Engineering Intern
Nathaniel's resume is aimed at hardware design, so every bullet involves a board, a measurement or a test method. His internship shows the full loop from design to bench validation, and the lab assistant role proves comfort with equipment and teaching. The senior design project adds power and field-test experience. A passed FE is listed because it keeps the licensure option open.
Read this resume as text
Nathaniel Okoye-Brandt · Austin, TX · nathaniel.okoyebrandt@email.example · (512) 555-0161
Summary
Electrical engineering graduate focused on board-level hardware design, with an internship designing and testing power supplies for industrial sensors. Captures schematics and lays out four-layer boards in Altium, simulates circuits in LTspice and debugs prototypes on the bench. Looking for an entry-level hardware engineering role.
Experience
Hardware Engineering Intern, Pedernales Sensor Systems · Austin, TX · May 2025 — Aug 2025
- Designed a 24 V to 3.3 V buck converter board in Altium for an industrial pressure sensor, meeting ripple and efficiency targets on the first prototype spin.
- Ran bench tests on load transients, thermal rise and startup behavior, documenting results in a test report used for the design review.
- Reworked a noisy ground layout on an existing sensor board after scope measurements, reducing signal noise that had caused false readings in the field.
- Wrote Python scripts to control a programmable load and log measurements, cutting manual test time for the hardware team.
Undergraduate Lab Assistant, Department of Electrical Engineering, Central Texas State University · San Marcos, TX · Sep 2023 — May 2025
- Supported weekly circuits labs for 60 students, explaining oscilloscope use and helping debug breadboard circuits.
- Built and tested replacement lab kits for an op-amp experiment, fixing parts shortages that had delayed sessions.
Projects
Senior design: Solar-powered water quality monitor
- Designed the power and sensing board, including MPPT charging, battery management and sensor front ends, and field-tested the device for two weeks at a creek site.
Education
BS, Electrical Engineering, Central Texas State University (2025)
Certifications
Fundamentals of Engineering (FE) Electrical and Computer, passed
Skills
Altium Designer, Schematic capture, PCB layout, LTspice, Analog circuit design, DC-DC converters, Oscilloscopes and bench equipment, STM32 microcontrollers, C, Python, MATLAB, Soldering and rework
Arash Mohammadi: Electrical Engineer
Arash works in building and industrial power, so his resume is built around design deliverables, studies and construction support. Naming the Canadian Electrical Code and SKM tells reviewers he can be productive quickly. His P.Eng appears in the summary because consulting firms need licensed engineers to seal drawings, and his EIT-era role states that supervision honestly.
Read this resume as text
Arash Mohammadi · Toronto, ON · arash.mohammadi@email.example · (416) 555-0112
Summary
Licensed professional engineer with six years designing power distribution for commercial, healthcare and light industrial buildings. Produces single-line diagrams, short-circuit and arc flash studies, and construction drawings to the Canadian Electrical Code. Supports projects from schematic design through commissioning and coordinates closely with architects, mechanical engineers and contractors.
Experience
Electrical Engineer, Lakeshore Building Systems Engineering · Toronto, ON · Apr 2022 — Present
- Lead electrical design for hospital and long-term care renovations, including normal and emergency power, generators and transfer switches.
- Complete short-circuit, coordination and arc flash studies in SKM, producing labels and recommendations that clients use to set safe work procedures.
- Design power distribution for a six-storey mixed-use building in Revit, coordinating with mechanical and architectural teams to remove clashes before tender.
- Review shop drawings, answer contractor questions and attend commissioning, signing deficiency lists through to project completion.
Electrical Design Engineer (EIT), Harbourline Industrial Engineering · Hamilton, ON · Jun 2020 — Mar 2022
- Designed motor control and power distribution upgrades for food and packaging plants, including MCC layouts and cable schedules.
- Prepared load calculations and utility service applications for plant expansions under the supervision of a licensed engineer.
- Surveyed existing electrical rooms on site and updated as-built drawings that had been out of date for years.
Education
BEng, Electrical Engineering, Harbourfront Technical University (2020)
Certifications
Professional Engineer (P.Eng.), Professional Engineers Ontario
Skills
Power distribution design, Single-line diagrams, Short-circuit and coordination studies, Arc flash analysis, SKM PowerTools, AutoCAD, Revit MEP, Canadian Electrical Code, Emergency and standby power, Lighting design, Construction administration, Commissioning
Rosalind Begay-Thornton: Principal Engineer, Substation Engineering
Rosalind's resume shows leadership through a capital program, standardized designs and safety practices, with clear utility vocabulary. The renewables interconnection bullet matches where utility hiring is active. Her protection engineering role proves technical depth, and her earliest role shows distribution fundamentals. Her PE leads the summary because utilities expect it for senior engineering positions.
Read this resume as text
Rosalind Begay-Thornton · Phoenix, AZ · rosalind.begaythornton@email.example · (602) 555-0147
Summary
Professional Engineer with 15 years in utility transmission and distribution, now leading substation engineering for a regional utility. Directs design of new substations and upgrades, protection schemes and interconnections for solar and battery storage. Known for safe, standardized designs and for developing engineers who become project leads.
Experience
Principal Engineer, Substation Engineering, Sonoran Valley Power Cooperative · Phoenix, AZ · Feb 2020 — Present
- Lead a team of eight engineers and designers delivering substation projects in a capital program of about $60 million a year.
- Standardized substation physical and protection designs into reusable packages, shortening design time for new distribution substations.
- Directed protection and interconnection design for three utility-scale solar and battery projects, coordinating studies with developers and the transmission planner.
- Developed grounding and safety review practices adopted across the engineering department after a field near miss.
Senior Protection Engineer, Desert Plains Electric · Tucson, AZ · Jun 2015 — Jan 2020
- Developed relay settings and protection schemes for transmission lines and substation transformers, and supported testing during commissioning.
- Investigated misoperations using event records and fault data, updating settings and logic to prevent repeat trips.
- Mentored three engineers through their PE preparation and first independent protection projects.
Distribution Engineer, Mesa Rural Electric · Mesa, AZ · Jun 2010 — May 2015
- Designed feeder extensions, line upgrades and capacitor placement for growing residential and commercial areas.
- Worked with field crews and customers on service design for new commercial loads, from load letters to energization.
Education
MS, Electrical Engineering (Power Systems), Desert Southwest University (2014)
BS, Electrical Engineering, Desert Southwest University (2010)
Certifications
Professional Engineer (PE), Arizona
Skills
Substation design, Protection and control, Relay settings, Transmission interconnection, Solar and BESS integration, Grounding design, ETAP, PSS/E basics, IEEE standards, NERC compliance awareness, Team leadership, Capital planning
Tailor this resume to a job in 30 seconds
Paste a real electrical engineer posting and AutoApplyMax rewrites your own resume for it: same facts, reordered and rephrased around what that employer asks for. The free plan includes 1 tailored resume a month.
How to write each section of a electrical engineer resume
Header and license line
List name, city, phone, email and LinkedIn. Hardware engineers can add a portfolio or GitHub with board photos, schematics from personal projects and test results; never post employer designs. Licensed engineers add PE or P.Eng. after their name and list jurisdictions in a licensure line.
Utility and field roles may require a driver's license or travel; mention it when the posting does.
Summary
State your specialty first: electronics hardware, power distribution for buildings, industrial controls, utility transmission and distribution, renewables, or embedded systems. These are different hiring markets with different reviewers.
Then add years of experience, the main tools and codes you design to, and license status. One sentence on the type of projects or products you work on finishes the picture, such as hospitals, data centers, consumer devices or rural distribution.
Experience
Write bullets around designs, studies, tests and field work, and say what happened: boards that passed compliance testing, studies that changed protective device settings, projects that energized on schedule. Include project values, voltage levels or product volumes when they help show scale.
Be precise about your role. Engineers-in-training should say work was done under a licensed engineer, and hardware engineers should separate what they designed from what they tested or supported.
Skills
Group skills by design tools, analysis and simulation, codes and standards, and hands-on or field skills. Hardware roles want Altium or Cadence, SPICE and bench equipment; power roles want ETAP or SKM, AutoCAD or Revit and code knowledge; controls roles want PLC platforms and SCADA.
List codes as you used them: NEC and NFPA 70E in the US, the Canadian Electrical Code in Canada, plus relevant IEEE, UL or CSA standards.
Education and licensure
List your electrical engineering degree and school, plus a master's if you specialized in power systems, signal processing or similar. Accredited programs (ABET in the US, CEAB in Canada) matter for licensure.
Licensure matters most for building, utility and consulting roles. Show FE, EIT, PE or P.Eng. status clearly. Product hardware roles rarely require a license, so keep that line short there.
Electrical Engineer resume summary examples
Entry-level objective: Electrical engineering graduate seeking an entry-level hardware design role building power and sensing electronics. Brings an internship designing and testing DC-DC converters in Altium, a field-tested senior design board and a passed FE exam.
It names the specialty and backs it with design, test and field evidence, which hardware managers look for first.
New-grad summary: Hardware engineer with internship experience in schematic capture, four-layer PCB layout and bench validation of power supplies. Uses LTspice, Altium and Python test automation, and has debugged real noise problems on production boards.
It shows tools in use and a real debugging story, which stands out among graduates who list only coursework.
Mid-level summary: Professional engineer with six years designing power distribution for healthcare, commercial and industrial buildings. Produces single-line diagrams, short-circuit and arc flash studies and construction drawings, and supports projects through commissioning. Licensed in Ontario.
Specialty, building types, deliverables and license are all present for consulting firms that bill by sector.
Senior summary: Licensed PE and principal engineer with 15 years in utility transmission and distribution. Leads substation design, protection and renewable interconnection projects within a large capital program, and develops engineers into project leads.
It names utility scope, technical specialty and people leadership, which separate principal engineers from strong individual contributors.
Electrical Engineer resume bullet examples: weak vs strong
The strong versions use made-up figures for a fictional candidate. Replace them with your own real numbers, or describe the scope (team size, volume, frequency) if you have none.
Names the circuit, tool, constraints and a first-pass success, all strong signals in hardware roles.
Shows specific tests and their role in a decision, not just time in the lab.
Names study types, software and how results were used for safety.
Specific systems and requirements show you can handle critical facilities.
Shows you follow designs into the field, which clients value highly.
Shows analytical skill and a reliability outcome in a high-stakes area.
Specific project types and coordination roles match current utility hiring needs.
Combines team leadership with a lasting improvement to how work gets done.
Keywords from live electrical engineer job postings
We read 175 live electrical engineer postings (149 US and 26 Canadian) from our job feed on October 14, 2026 and counted how many mention each skill, tool or credential. A posting counts once per term, wherever it appears in the title or description. Use the list to check your resume for gaps that are real for you, not as a checklist.
| Keyword | Postings | |
|---|---|---|
| Bachelor's in Electrical Engineering | 110 of 175 (63%) | |
| Circuit design | 90 of 175 (51%) | |
| Protection and relaying | 79 of 175 (45%) | |
| Power distribution | 61 of 175 (35%) | |
| AutoCAD Electrical | 60 of 175 (34%) | |
| PE license | 59 of 175 (34%) | |
| Power systems | 53 of 175 (30%) | |
| Construction support | 45 of 175 (26%) | |
| Short circuit / arc flash | 42 of 175 (24%) | |
| Commissioning | 41 of 175 (23%) | |
| Revit | 39 of 175 (22%) | |
| SKM PowerTools | 38 of 175 (22%) | |
| PLC / controls | 38 of 175 (22%) | |
| NEC | 37 of 175 (21%) | |
| ETAP | 34 of 175 (19%) | |
| Substations | 32 of 175 (18%) | |
| Grounding | 31 of 175 (18%) | |
| Lighting design | 28 of 175 (16%) | |
| Analog design | 26 of 175 (15%) | |
| Transformers | 25 of 175 (14%) | |
| Renewables / solar / BESS | 22 of 175 (13%) | |
| Switchgear | 21 of 175 (12%) |
Source: 175 unique postings whose title matches the role, from the WhatJobs publisher feed (US and Canada), collected October 14, 2026. Duplicate reposts were counted once. Counts change daily; a term not listed may still matter for a specific employer.
Skills for a electrical engineer resume
Electronics and hardware
- Schematic capture
- PCB layout (Altium, Cadence)
- SPICE simulation
- Power electronics
- Embedded C
- Bench test equipment
Show at least one board you designed and tested end to end.
Power systems
- Load flow and short-circuit studies
- Arc flash analysis
- Protection and relaying
- ETAP or SKM
- Grounding design
- Substation design
Name the study types and software with the voltage levels or facility types involved.
Buildings and industrial
- Power distribution design
- Emergency power
- Lighting design
- Motor control
- PLC and SCADA
- AutoCAD and Revit
Consulting firms value code-compliant drawings and coordination with other trades.
Codes and standards
- NEC (NFPA 70)
- NFPA 70E
- Canadian Electrical Code
- IEEE standards
- UL and CSA product standards
List only the codes relevant to your sector and country.
Soft skills, and how to prove them
- Coordination: Describe a project where you resolved clashes or interfaces with mechanical, architectural or firmware teams before construction or production.
- Safety mindset: Mention arc flash studies, safety reviews or design changes that reduced risk for workers or users.
- Troubleshooting: Give an example of tracing a field failure or misoperation to a root cause and fixing it.
- Clear documentation: Point to test reports, design reviews or drawing sets that others relied on to make decisions.
- Mentoring: Name engineers or interns you guided through designs, licensure preparation or their first projects.
Certifications and licenses
- Professional Engineer (PE), Electrical and Computer (State engineering licensing boards (exam by NCEES)): Important for building design, utility and consulting roles that seal drawings; NCEES offers power and other electrical exam options.
- Fundamentals of Engineering (FE) / EIT (NCEES exam; designation granted by the state board): List it once passed; it is the first step toward a PE.
- Professional Engineer (P.Eng.) (Provincial regulators such as PEO, APEGA or Engineers and Geoscientists BC): Required in Canada to practise engineering and use the engineer title; Quebec uses the OIQ.
- Certified Energy Manager (CEM) (Association of Energy Engineers (AEE)): Useful for engineers working on energy efficiency, building upgrades and energy audits.
- Certified Interconnect Designer (CID) (IPC): Shows PCB design knowledge for hardware roles focused on board layout.
US vs Canada: electrical engineer resumes and pay
United States
In the US, a PE license matters most for building design, utilities and consulting, where engineers seal drawings; many product and electronics companies operate under industrial exemptions and do not require it. Licensing is by state after the FE exam, experience and the PE Electrical and Computer exam from NCEES. Building work follows the NEC as adopted by each state or city, and workplace electrical safety follows NFPA 70E. Defense electronics roles may require citizenship, ITAR eligibility or a clearance. Leave out photo, age and marital status.
| BLS occupation | 10th pct. | Median | 90th pct. |
|---|---|---|---|
| Electrical Engineers (SOC 17-2071) | $76,550 | $120,630 | $184,300 |
Annual wages, US national, BLS Occupational Employment and Wage Statistics, May 2025.
Canada
In Canada, practising engineering and using the title engineer require a license from a provincial regulator such as PEO, APEGA or the OIQ; graduates register as engineers-in-training first. Electrical installations follow the Canadian Electrical Code as adopted provincially, and products need certification marks from accredited bodies such as CSA. Electrical safety authorities differ by province, such as the Electrical Safety Authority in Ontario. Use metric units. Quebec work requires French, and the OIQ title is ingénieur.
| Job Bank occupation | Low | Median | High |
|---|---|---|---|
| Electrical Engineer (NOC 21310) | $33.65/h | $50.67/h | $79.23/h |
Canada-wide wages in CAD, Job Bank (Government of Canada), reference period 2023-2024. Provincial figures differ; follow the link for your province.
Check your electrical engineer resume before you apply
The free ATS checker compares your resume with a real job description and lists the keywords you are missing. No signup needed for the scan.
FAQ
Do electrical engineers need a PE license?
It depends on the sector. Engineers who design building systems, utility infrastructure or public projects usually need a PE to seal drawings and advance. Many hardware and product engineers never get one. If you work in a sector that values it, list your FE or EIT status as soon as you have it.
How do I choose which specialty to highlight?
Pick the specialty that matches the posting, and order your skills and bullets to fit. If you have experience in two areas, such as controls and power distribution, lead with the one the employer needs and keep the other as supporting experience. Avoid a summary that claims every area at once.
Should I include personal electronics projects?
Yes, especially early in your career. Projects with schematics, board layouts, firmware and test results show initiative and practical skill. Link photos or repositories and describe what you measured. Keep them out of the way once you have strong professional experience, unless they show a skill your jobs do not.
What codes should I list on my resume?
List the codes you have designed to, such as the NEC and NFPA 70E in the US or the Canadian Electrical Code in Canada, plus relevant IEEE, UL or CSA standards. Mention them in context, for example designing emergency power to code, rather than as a long list.
Can I call myself an electrical engineer in Canada without a P.Eng.?
Using the title engineer without a license can lead to action by the provincial regulator. Graduates registered as engineers-in-training can say so. Otherwise use a descriptive title like electrical designer or electrical engineering graduate, while listing each job with the title your employer used.